Curtis PMC 1204 Series - User Manual

MANUAL
© 1999 CURTIS INSTRUMENTS, INC.
DESIGN OF CURTIS PMC 1200 SERIES
CONTROLLERS PROTECTED BY U.S.
PATENT NO. 4626750.
1204X/1205X
and 1209/1221
MOTOR CONTROLLERS
1204X / 1205X / 1209 / 1221 Manual
p/n 98796, Rev. D: May 1999
CURTIS PMC
235 East Airway Boulevard
Livermore, California 94568 USA
Tel: 925-961-1088
Fax: 925-961-1099
www.curtisinst.com

Summary

Curtis PMC Controller Overview

Key Controller Features

Details on smooth operation, efficiency, HPD, thermal, and undervoltage protection.

Hardware Installation Guide

Controller Mounting and Environment

Guidance on controller placement, heat sinking, and environmental protection.

Throttle Input Options

Wiring and Connection Guide

Low Current and Logic Connections

High Current and Typical Wiring

Throttle Pot and Electronic Throttle Wiring

Installation Checkout Procedure

Pre-Operation Vehicle Checks

Safety precautions and initial power checks before vehicle operation.

System Functionality Tests

Step-by-step tests for throttle, direction, HPD, and SRO features.

Troubleshooting and Bench Testing

Operational Notes and Common Issues

In-Vehicle Diagnostic Tests

Detailed step-by-step tests using a voltmeter to diagnose problems.

Bench Test Setup and Procedure

Equipment required and steps for testing controllers outside the vehicle.

Electrical Specifications for Models

1204 X;1205 X Specifications

1209;1221 Specifications

Curtis PMC 1204 Series Specifications

General

Brand	Curtis
Model	PMC 1204 Series
Category	Controller
Language	English