To Next PageTo Next Page
Need help?Do you have a question about the Curtis MultiMode 1207B and is the answer not in the manual?
General| PWM Frequency | 16 kHz |
|---|---|
| Operating Temperature | -40°C to 50°C |
| Protection Features | Overvoltage, Undervoltage |
| Model | 1207B |
| Operating Voltage | 24V - 36V |
| Max Power | 7200W |
Describes the 16-pin low power connector and its pinout for control signals.
Details the high current bus bar connections to battery and motor for power transfer.
Basic wiring diagram for series motors with field reversing capabilities.
Wiring diagram for compound wound motors, detailing armature and shunt field connections.
Explains wiring for various throttle types, including 5kΩ-0, 0-5V, and electronic throttles.
Describes essential components like keyswitch, contactors, and protection devices for system operation.
Step-by-step guide to verify successful installation and initial operation of the controller.
Procedure to test the controller's fault detection capabilities as per relevant standards.
Explains fault codes indicated by the controller's Status LED for basic fault identification.
Using the programmer for detailed diagnostics, fault display, and troubleshooting steps.
Overview of the handheld programmer's interface, navigation keys, and basic functions.
Detailed steps for modifying controller parameters via the programmer's interface.
How to monitor controller status and variables in real-time using the programmer.
Accessing and clearing the controller's fault and history logs for diagnostic purposes.
Lists the available menus and parameters that can be accessed on the handheld programmer.
How the controller internally monitors for and signals fault conditions.
Feature allowing two distinct operating modes for different vehicle conditions.
