Curtis PMC 1209-6A5 Series

Need help?

Do you have a question about the Curtis PMC 1209-6A5 Series and is the answer not in the manual?

Summary

Hardware Installation Guide

Controller Mounting and Installation

Mounting and installation requirements for the controller unit.

Throttle Input Configuration

Details on 0-5kΩ and 5kΩ-0 throttle input configurations.

Wiring Procedures for Curtis PMC Controllers

Low Current Connections

Details on 6-pin connector for logic control.

High Current Connections

Details on bus bars for battery and motor connections.

Typical Installation Wiring

Schematic diagram of a typical installation.

Throttle Pot Wiring

Electronic Throttle Wiring

Installation Checkout Procedure

Controller and Potbox Maintenance & Adjustment

Controller Maintenance and Adjustment

Potbox Maintenance and Adjustment

Troubleshooting and Bench Testing Guide

In-Vehicle Diagnostic Tests

Step-by-step tests to diagnose issues within the vehicle.

Bench Testing Procedures

Methods for testing controllers outside the vehicle.

Appendix C: Electrical Specifications

1204 X;1205 X Electrical Specifications

Table of electrical parameters for 1204X/1205X models.

1209;1221 Electrical Specifications

Table of electrical parameters for 1209/1221 models.