2 STANDARDS AND PUBLICATIONS
GB-6
2 STANDARDS AND PUBLICATIONS
2.1 STANDARDS AND PUBLICATIONS ___________________________________________
This product meets requirements of ANSI B56.8 and has
been approved by the Factory Mutual Research
Corporation to meet all Powered Industrial Truck portions
(classification D or G) of the OSHA requirements (as
stated in section 1910.178). Approved power trucks shall
bear a label or some other identifying mark indicating
approval by the testing laboratory. This product conforms
to EC directives and amendment 89/392 & 91/368.
Users, operators and service persons should be familiar
with the following standards and publications: (The
material may be obtained from the address shown)
Factory Mutual Approval Standard:
Class No’s 7811 & 7813; Gasoline or Diesel
Powered Trucks, Types G, GS, D or DS.
Factory Mutual Research Corp.
1151 Boston-Providence Highway
Norwood, Massachusetts 02062 U.S.A.
National Fire Protection Association:
ANSI/NFPA #505; Powered Industrial Trucks
National Fire Prevention Association
Batterymarch Park
Quincy, Massachusetts 02269 U.S.A.
Personal Burden Carriers:
ANSI/ASME B56.8
American National Standards Institute, Inc.
1430 Broadway
New York, New York 10018 U.S.A.
Internal Combustion Engine Powered Industrial Trucks:
ANSI/UL 558
American National Standards Institute, Inc.
1430 Broadway
New York, New York 10018 U.S.A.
OR
Underwriters Laboratories Inc.
333 Pfingsten Road
Northbrook, Illinois 60062 U.S.A.
Flammable and Combustible Liquids Code:
ANSI/NFPA 30
American National Standards Institute, Inc.
1430 Broadway
New York, New York 10018 U.S.A.
OR
National Fire Prevention Association
Batterymarch Park
Quincy, Massachusetts 02269 U.S.A.
To Next Page
Loading...
