Custers Hydraulica B.V. Venray NL
26-mrt-20 www.custers.nl
1 INTRODUCTION
The Custers® mobile scaffold tower is part of a wide range aluminium scaffold variants.
The Custers® mobile scaffold tower, if assembled according to this manual, complies with the
standard EN1004.
The Custers® mobile scaffold tower is available in the following versions:
- Scaffold length: 1.8 m and 2.5 m
- Scaffold width: 1.3 m and 0.7 m
This manual is intended to instruct you step by step how to assemble your scaffold easily and
safely. Incorrect assembly may result in serious personal injury. Read the safety instructions
carefully before assembly. The erection and dismantling should be done by experienced and
competent persons only.
The user is responsible for having this manual at hand at the place where the mobile
scaffold tower is being assembled and used, as well as with the person who
supervises the work.
If there are any uncertainties with regard to this manual, please contact your supplier and/or
producer.
Producer:
Custers Hydraulica B.V.
Smakterweg 33
5804 AE Venray The Netherlands
Telephone: +31 (0) 478 553 000
Telefax: +31 (0) 478 553 010
Email address: info@custers.nl
Website: www.custers.nl
Supplier:
To Next Page
Loading...
