Custers Hydraulica B.V. Venray NL
26-mrt-20 www.custers.nl
2 WARRANTY AND LIABILITY
Custers warrants material and manufacturing defects for 12 months after delivery. The
warranty means that we repair faults at our own expense or - at our sole discretion –
will take back all or part of the delivered goods and replace them with a new delivery.
If we replace products delivered in fulfilment of our warranty obligation, the replaced
products become our property. All costs arising from the aforementioned obligation shall
be borne by the commissioning party. If products are provided for processing, repair,
etc., a warranty will only be given for the adequacy of the execution of the operations
that have been assigned.
Our liability does not apply:
a. If the faults are the result of improper use or any other
causes not involving material or manufacturing defects;
b. If the cause of the defects cannot be clearly demonstrated;
c. If all instructions for the use of the products, including the guidelines as indicated
in this manual, have not been strictly and completely observed.
The manufacturer’s liability does not apply if the buyer, on his own initiative, makes or
arranges for changes and/or repairs to the delivered products.
3 Marking of mobile scaffold tower components
- each aluminium / plastic component from the mobile scaffold tower is provided with the
Custers’ company name and a two-digit code corresponding to the year of production.
-8-rung frames are always provided with a compulsory waterproof label with details
of the scaffolding class and assembly instructions.
4 INSPECTION UPON DELIVERY
Upon receipt, check that the tower scaffolding is complete and undamaged.
Contact your supplier immediately if you notice that the components of the tower
scaffolding are damaged or if the components that have been delivered are incomplete.
To Next Page
Loading...