17
The user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
11. Technical Specifications
Model-No. BM 35
Method of
Measurement
oscillometric, non-invasive blood pressure
measurement on the upper arm
Measurement
Range
cuff pressure range: 0 – 300 mmHg
blood pressure range: 40 – 280 mmHg
heart rate 40 –199 beats/minute
Accuracy of the
reading
systolic ± 3 mmHg / diastolic ± 3 mmHg /
heart rate ± 5% of the displayed value
Measuring
uncertainty
max. permissible standard deviation according
to clinical testing:
systolic: 8 mmHg /diastolic: 8 mmHg
Sets of Memory 2 x 60 memory places (120 memory total)
Unit Dimension L 5.3” x W 4.1” x H 2.1”
(L 135 mm x W 105 mm x H 53 mm)
Unit Weight approx. 0.48 lb (217 g)
CuffSize upper arm circumference approx. 9” – 13”
(23 – 33 cm)
Note: large cuff (13” to 17” / 33 to 43 cm) is
available at customer service.
Operating
Temperature
+ 50 °F to 104 °F (+ 10 °C to + 40 °C),
15% to 90% RH
Storage- and trans-
port temperature
- 4 °F to 158 °F (- 20 °C to + 70 °C), ≤ 90% RH
Power Supply 4 x 1.5 V AAA-Batteries (alkaline type LR03)
Battery Life for approx. 250 measurements, depending on
blood pressure level or inflation pressure
Accessories storage bag, operating instructions,
4 AAA batteries
BF Classification
– Internally powered equipment
– BF type applied part
– IPXO
– Not suitable for use in presence of flam-
mable anesthetic mixture with air or with
Oxygen or nitrous oxide
– Continuous operation with short-time
loading
Key to symbols
WARNING! Readthesafety
informationandallinstructionsto
avoidseriousinjury.
application part Type BF
Discard the used product to the recyc-
ling collection point according to local
regulations.
Auto-shut-off 1 minute after last button operation
These specifications are subject to change without notice for pur-
pose of improvement.
•
This unit is in line with the International Standard
IEC 60601-1-2 and is subject to particular pre-
cautions with regard to electromagnetic compat-
ibility (EMC). Please note that portable and mobile