EasyManua.ls Logo

CyberPower CPS1500AVR - User Manual

CyberPower CPS1500AVR
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual for:
CPS1500AVR UPS
TM
and PowerPanel Plus Software
ADDITIONAL INSTALLATION TIPS CAN BE FOUND AT:
www.cyberpowersystems.com/1500FAQs.htm

Table of Contents

Other manuals for CyberPower CPS1500AVR

Preview: Battery Replacement Manual
Battery Replacement Manual2 pages

Questions and Answers

  • L
    lopezjoelJul 25, 2025
    What to do if CyberPower UPS will not turn on?
    • S
      Sandra DavisJul 25, 2025
      If your CyberPower UPS will not turn on, there are several possible reasons. First, the on/off switch is designed to prevent damage by rapidly turning it off and on, so turn the UPS off, wait 10 seconds, and then turn it back on. Second, ensure the unit is connected to a 120V 60Hz outlet. If the issue persists, the battery may be worn out, and you should contact CyberPower Systems about replacement batteries. Finally, if none of these steps work, there may be a mechanical problem, and you should contact CyberPower Systems for assistance.
  • J
    Jonathan NelsonAug 1, 2025
    How to fix CyberPower UPS surge protection outlets not providing power?
    • S
      Scott JeffersonAug 1, 2025
      If the full-time surge protection outlets on your CyberPower UPS stop providing power, it's likely due to a tripped circuit breaker caused by an overload. To resolve this, turn off the UPS, unplug at least one piece of equipment, wait 10 seconds, reset the circuit breaker by pressing the button, and then turn the UPS back on.
  • G
    Gabriel PattonAug 9, 2025
    Why CyberPower UPS doesn't provide expected runtime?
    • C
      Carla MartinAug 9, 2025
      If your CyberPower UPS isn't providing the expected runtime, there are a couple of potential causes. First, the battery may not be fully charged. To address this, recharge the battery by leaving the UPS plugged in. Alternatively, the battery might be worn out, in which case you should contact CyberPower Systems about replacement batteries.
  • A
    Anthony WilliamsAug 16, 2025
    How to fix inactive PowerPanel® Business on CyberPower UPS?
    • J
      Jacob VasquezAug 17, 2025
      If PowerPanel® Business is inactive, there are a couple of things to check. First, make sure the USB cable is properly connected to both the UPS unit and an open USB port on the back of your computer. If it is connected, the unit may not be providing battery power. To fix this, shutdown your computer, turn the UPS off, wait 10 seconds, and then turn the UPS back on. This should reset the unit.

Summary

Important Safety Instructions

Product Components Overview

Hardware Installation Guide

Determine Power Requirements

Calculates the power needs of your equipment to ensure compatibility with the UPS.

Software Installation Information

PowerPanel Plus Software Installation Guide

Comprehensive instructions for installing PowerPanel Plus on various Windows versions.

PowerPanel Plus Software User Manual

PowerPanel Plus Advanced Setup

Configuration options for advanced settings like voltage thresholds and cold start.

PowerPanel Plus Schedule Menu

Scheduling automatic UPS startup and shutdown events.

PowerPanel Plus Logging and OS Guides

PowerPanel Installation Guide for Windows 95;98;ME

Specific installation steps for PowerPanel on Windows 95/98/ME.

PowerPanel Software Installation by OS

Installation procedures for PowerPanel software on Windows XP, NT, and 2000.

System Testing and Status Indicators

Definitions for LED Indicators

Explanation of the meaning of various LED indicators on the UPS.

Battery Replacement Procedure

Troubleshooting and Specifications

Troubleshooting

Common problems, causes, and solutions for UPS operation.

Warranty and Guarantee Information

Power Control Guarantee

Protection for connected equipment against UPS failures.

Conditions Common to Warranty

General terms, limitations, and exclusions for the warranty.

FCC Notice and Contact Information

CyberPower CPS1500AVR Specifications

General IconGeneral
Output power950 W
Input frequency50/60 Hz
Audible alarm(s)Yes
Surge energy rating1.800 J
Output power capacity1.5 kVA
Weight (imperial)58 lbs
Dimensions (WxDxH)438.15 x 400 x 89 mm
Operating temperature (T-T)32 - 95 °F
Dimensions (W x D x H) (imperial)17.25 x 15.75 x 3.5 \
Battery technologySealed Lead Acid (VRLA)
Battery recharge time8 h
Typical backup time at full load6 min
Typical backup time at half load18 min
Modem (RJ-11) ports1
Serial ports quantity2
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Operating relative humidity (H-H)0 - 95 %
CertificationUL1778, cUL, FCC DOC Class B
Weight and Dimensions IconWeight and Dimensions
Weight26308 g

Related product manuals