Appendix B-Power Device Network Utility
• Overview
The CyberPower Power Device Network Utility is an easy-to-use interface which is
used for establishing IP addresses on CyberPower PDU devices.
• Installation
Step 1. Insert the CD labeled “PDU Software Installation CD” into the CD/DVD drive.
Step 2. Select Power Device Network Utility from the installation menu (Shown in
Figure 1.).
Step 3. Select Next in the software wizard.
Step 4. Choose an installation directory and user settings.
Select Next (Shown in Figure 2.).
Step 5. Select Next to comfirm the settings and install.
Step 6. Select Close to finalize the installation.
Figure 1. Installation Menu
Figure 2. Installation folder and settings
To Next Page
Loading...
Need help?
General
