CyberPower PDU15SW8FNET User Manual

3
For more information on CyberPower products, visit www.CPSww.com
Safety Precautions
Read the following before installing or operating the
Power Distribution Units (PDU):
• Use only the supplied hardware to attach the mounting brackets.
• The PDU must be plugged into a three-wire, grounded outlet on a circuit that
is protected by a fuse or circuit breaker. For PDU15xxxxx series, please use
15A circuit protector. For PDU20xxxxx series, please use 20A circuit protector.
For PDU30xxxxx series, please use 30A circuit protector. Connection to any
other type of power outlet may result in a shock hazard.
• Do not use extension cords or adapters with this PDU.
• Never install a PDU, or associated wiring or equipment, during a lightning storm.
• Ensure that the power cord, plug, and socket are in good condition.
Package Contents
(For 2U Series)
Introduction
PDU
Mounting Brackets x 2
RJ45/DB9 Serial Port
Connection Cable
10 (M3x6) Cord Retention Tray
Mounting Screws
(Includes two spares)
Cord Retention Trays x2
10 (Flat Head M4x8) Bracket Mounting
Screws (Includes two spares)
6 (M5x12) Screws / 6 Washers
(Includes two spares for each)
Cable Ties: Qty. 20 User Manual / Registration Card / CD
Documentation
Registration
Card
C
yber
Pow
er
R
e
l
i
a
b
i
l
i
t
y.
Q
u
a
l
i
t
y.
Va
l
u
e
.
R
U
s
e
r
's
M
a
n
u
a
l
Check
Before using, please check to ensure the package contains all the
items shown above. If there are missing parts, please contact
your local CyberPower (refer to CyberPower International P.21)
for technical support.
To prevent the risk of fire or electric shock, this PDU should be installed in a
temperature and humidity controlled indoor area free of conductive contaminants. Do
not install this PDU where excessive moisture or heat is present.

CyberPower PDU15SW8FNET Specifications

General

Brand	CyberPower
Model	PDU15SW8FNET
Category	Power distribution unit
Language	English