Remove front roller
1. Loosen the left mounting bolt using a 9/16” Socket wrench.
Qty.DescriptionItem
1Front roller1
1Drive belt2
1Mounting bolt3
1Tensioning slot4
2. Loosen the right mounting bolt using a 9/16” Socket wrench.
3. Remove both mounting bolts.
4. Slide the drive belt off of the front roller and remove the front roller.
Remove running deck
1. Remove the eight screws and eight flat washers that hold the deck in place using a 7/16” Socket
wrench.
Qty.DescriptionItem
87/16” Bolts1
8Flat washer2
1Running deck3
1Running belt4
2. Slide the running deck out of the frame.
Page 138 of 209
Cybex 625T Treadmill Part Number
To Next Page
Loading...
