CYBEX 625T - Page 160

Remove motor controller
1. Remove the four screws that hold the motor controller to the motor base plate using a Phillips
screwdriver.
Qty.DescriptionItem
4Screws1
1Motor Base Plate2
1Motor Controller3
2. Remove the motor controller.
Cybex may want this part back for evaluation. Contact Cybex Customer Service at 888-462-9239.
Install motor controller
1. Position the motor controller in place on the motor base plate.
Qty.DescriptionItem
4Screws1
1Motor Base Plate2
1Motor Controller3
2. Install the four screws that hold the motor controller to the motor base plate using a Phillips
screwdriver.
Page 160 of 209
Cybex 625T Treadmill Part Number