Remove motor cover
1. Loosen, but do not remove the two front cover screws securing the motor cover using a Phillips
screwdriver.
Qty.DescriptionItem
1Motor Cover1
1Front Cover2
2Screws3
4Plastic Connectors4
2. Remove motor cover by carefully lifting vertically. Do not break the four plastic connectors.
Remove shield
1. Loosen, but do not remove the seven screws securing the shield to the base using a Phillips
screwdriver.
Qty.DescriptionItem
1Base1
7Screws2
1Shield3
2. Remove shield by sliding sideways and then vertically off of base.
Page 171 of 209
Cybex 625T Treadmill Part Number
To Next Page
Loading...
