CYBEX 625T - Page 183

4. Remove the ground cable from the E3 View monitor using an 11/32” nut driver.
Qty.DescriptionItem
1Console Assembly1
1E3 View Monitor2
9Screw3
1Ground wire screw4
5.
Component damage. Do not touch front of E3 View Monitor. Oil from
fingertips will mark screen.
Remove the nine screws securing the E3 View Monitor to the console using a Phillips screwdriver.
Install E3 View Monitor
1.
Component damage. Do not touch front of E3 View Monitor. Oil from
fingertips will mark screen.
Remove protective cover from new E3 View monitor screen and place on old E3 View monitor.
2. Install the nine screws securing the E3 View Monitor to the console using a Phillips screwdriver.
Qty.DescriptionItem
1Console Assembly1
1E3 View Monitor2
9Screw3
1Ground wire screw4
3. Install the ground cable to the E3 View monitor using an 11/32” nut driver.
Page 183 of 209
Cybex 625T Treadmill Part Number