2. Pry the wireless heart rate board from the console using a flat head screwdriver.
3. Clean any remaining double sided tape from the console.
Install wireless heart rate board
1. Locate the new wireless heart rate board.
2. Peel the backing from the double sided tape and place the wireless heart rate board in position on
the console.
Qty.DescriptionItem
1Wireless Heart Rate Cable1
1Wireless Heart Rate Board2
3. Plug the wireless heart rate cable into the wireless heart rate board.
Install back cover
Install the four screws securing the back cover to the console assembly using a Phillips screwdriver.
Qty.DescriptionItem
1Console Assembly1
1Back Cover2
4Screws3
Complete installation
1. Plug the power cord into the power outlet.
2. Verify the power cord is not being pinched under the front of the treadmill.
3. Operate the unit at all levels to verify proper operation.
Page 186 of 209
Cybex 625T Treadmill Part Number
To Next Page
Loading...
