Remove E-stop cover
1. Remove the three screws securing the E-stop cover to the console using a Phillips screwdriver.
Qty.DescriptionItem
3Screw1
1Console2
1E-stop Cover3
1Motion Sensor4
2Screw5
2. Remove the E-stop cover.
Remove motion sensor
1. Remove the two screws securing the motion sensor to the console using a Phillips screwdriver.
2. Remove the motion sensor.
Install motion sensor
Install the two screws securing the motion sensor to the console using a Phillips screwdriver.
Install E-stop cover
Install the three screws securing the E-stop cover to the console using a Phillips screwdriver.
Qty.DescriptionItem
3Screw1
1Console2
1E-stop Cover3
1Motion Sensor4
2Screw5
Page 201 of 209
Cybex 625T Treadmill Part Number
To Next Page
Loading...
