Error 6 - Membrane Fault (Stuck Key)
Cause:
Membrane is showing a key constantly activated (noticed at power-up.)
Service:
• Check the membrane and thumb controls for signs of fatigue, cracking, or possible moisture intrusion.
• Ensure the membrane connector is fully seated.
• Inspect the membrane cable for cuts, pinches, and all leads are fully inserted in their connectors.
• Replace the membrane and/or the thumb control switches.
Key list
Left and Right controls
DescriptionKey
Incline Down1
Incline Up2
Speed Down3
Speed Up4
Main controls
DescriptionKey
Volume Up5
Volume Down6
Channel Up or Next7
Channel Down or Previous8
STOP9
Setup11
Scan/Hold or Display option12
Enter13
Quick Start14
Programs or Workouts15
Manual16
Page 67 of 209
Cybex 625T Treadmill Part Number
To Next Page
Loading...
