Cybex Owner’s Manual
22
In addition to the mounting screws, there are four plastic connectors that secure the front covers
together. Ensure that all four plastic connectors are inserted properly in each front cover.
3. Install front right cover with one screw using a Phillips screwdriver.
Install top cap.
Install top cap with two screws using a Phillips screwdriver.
1
2
Item Description
1 6 Top Cap
2 14 Screws (2)
Install back cap.
1. Place the back cap into the top cap. Ensure the back cap is fully inserted into the top cap.
2
1
3
Item Description
1 Top Cap
2 14 Screws (2)
3 3 Back Cap
2. Install the back cap with two screws using a Phillips screwdriver.
To Next Page
Loading...
