Cybex Owner’s Manual
60
Heart Rate Indicator
Contact Heart Rate – Lightly hold hand grips on the handlebar ensuring that hands are clean and
contact both the front and back sensors of each grip. During this time the heart rate LED will cycle
through all of the colors. Do not move hand position on grips during this time. A heart rate will display
in typically 30 seconds or less.
Once the actual heart rate is determined, the backlit heart will blink at that rate. The color of the heart
represents a scale of low to high, providing for zones the user can target.
Blue 0 – 69 BPM
Green 70 – 93 BPM
Yellow 94 – 119 BPM
Blood Orange 120 – 169
Magenta 170 and higher
Factors that interfere with heart rate signal:
• hand lotions
• oils or body powder
• excessive dirt
• excessive movement
• body composition
• hydration
• too loose grip
• too tight grip
• resting or leaning on grips
Wireless Heart Rate – To use this feature, a Polar® compatible heart rate transmitter belt (not
included) must be worn.
Fan Control
The fan defaults to the “OFF” setting. The user can change to “Fan Low”, “Fan High”, or “Fan Off”
setting by pressing the fan
key.
To Next Page
Loading...
Need help?
General
