Cybex Owner’s Manual
55
6. Press the ENTER icon to complete weight input.
7. Press the Gear/Power/RPM + – keys to change the Gear/Power/RPM at any time.
8. Press the Stop key at any time to end workout. “Workout Review” is displayed.
Detailed Operation Guide
Maximum user weight is 400 lbs. (181 kg).
Skip step 1 if unit is not equipped with a power cord.
1. Plug the E3 View monitor power cord or optional power cord into a power outlet from a
grounded circuit, See Electrical Requirements. Coil up the remainder of the power cord and
place it out of the way. The control panel will light up and be in the Dormant Mode.
2. Verify pedals are completely stopped.
3. Grasp handrails and step carefully into pedals. Begin pedaling.
4. Select Quick Start or Workouts.
If Quick Start is selected, The console will beep for one second and enter Active Mode.
If Workouts is selected, Select a workout and setup options.
Tap one of the workout type icons from the workout options screen.
Tap one of the workout icons from the workouts screen.
Select a goal of Time, Distance, or Calorie.
Tap the Start key to begin workout.
To Next Page
Loading...
Need help?
General
