Cybex Owner’s Manual
28
8. Connect the console cable’s DIN connector to the power supply output. Make sure the two
connectors snap rmly together and can not be pulled apart without pulling the sleeve back to
release it.
3
1
2
Item Description
1 Power Supply Output
2 Console Cable DIN Connector
3 11 Power Cord
Install the front covers.
1. Install front right cover with three screws using a Phillips screwdriver.
1
3
2
Item Description
1 15 Screw, 8-16 x .50” (3)
2 16 Screw, 8-16 x .75” (1)
3 4 Front Right Cover
In addition to three mounting screws per front cover, there are ve plastic connectors that secure the
front covers together. Ensure that all four plastic connectors are inserted properly in each front cover.
To Next Page
Loading...
