CYBEX Arc Trainer 770A - Page 32

32
Cybex Owner’s Manual
Install accessory tray base
1. Place the accessory tray in position on the frame and route the iPod cable towards the back of
the unit.
Coax Cable
(E3 View Monitor option)
Screws
(4)
Frame
iPod Cable
Accessory
Tray Base
2. Install the four screws using a Phillips screwdriver.
Install accessory tray top
1. Place the accessory tray top in position on the accessory tray base and route the iPod cable
through the notch in the accessory tray. Place the iPod cable strain relief on the inside edge of
the notch in the accessory tray.
Screws (2)
iPod Cable
Strain Relief
Notch
Accessory
Tray Top
Accessory
Tray Base
2. Install the two screws using a Phillips screwdriver.