Cybex Owner’s Manual
6 7
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for safety. If the provided plug does not t into
outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the monitor.
• Only use attachments/accessories specied by the manufacturer.
• Unplug this monitor during lightning storms or when unused for long periods of time.
• Refer all servicing to qualied service personnel. Servicing is required when the monitor has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the monitor, has been exposed to rain or moisture, does not operate
normally, or has been dropped.
• Do not expose this monitor to dripping or splashing and ensure that no objects lled with liquids,
such as vases, are placed on the monitor.
• To completely disconnect this monitor from the AC Mains, disconnect the power supply cord plug
from the AC receptacle.
• The mains plug of the power supply cord shall remain readily operable.
• Overloading – Do not overload the AC outlets or extension cords.
• Replacement Parts – In case the product needs replacement parts, make sure that the service
person uses replacement parts specied by the manufacturer.
• Safety Check – Upon completion of service or repair work, request the service technician to perform
a safety check to ensure that the monitor is in proper operating condition.
• Consult dealer if in doubt about the installation, operation, or safety of this monitor.
To Next Page
Loading...
Need help?
General
