EasyManuals Logo

CYBEX Cloud Q User Manual

CYBEX Cloud Q
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background image
7. Pull up on Harness Straps to snug around the child's
hips while holding the Harness Buckle in place.
8. Slowly pull the adjuster strap to tighten the Shoulder Straps.
A snug strap should not allow any slack. It lies in a relatively
straight line without sagging. It does not press on the child’s
esh or push the child’s body into an unnatural position.
9. Position the center of the Chest Clip even with the
child's armpits. Make sure the Shoulder Pads do not
interfere with the placement of the Chest Clip.
If the Shoulder Pads don't allow a proper t,they can be removed to
provide more space for the Chest Clip. Unsnap to remove.
10. Harness Pinch Test. To test for a properly tightened
Harness, pinch the shoulder strap. A snug Harness
should not allow you to pinch any slack when pinched
between your thumb and forenger. If needed, pull
adjuster strap further for a tight and proper t.
To keep child warm, place a blanket over child and Infant Carrier, AFTER
you have properly secured and tightened Harness around your child.
21
7
8
9
10
ALWAYS KEEP child properly secured in Harness.
NEVER SECURE child in Infant Carrier dressed in a
bulky garment or heavy clothing.
USING THE INFANT CARRIER

Table of Contents

Other manuals for CYBEX Cloud Q

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CYBEX Cloud Q and is the answer not in the manual?

CYBEX Cloud Q Specifications

General IconGeneral
CertificationECE R-44/04, Supplement 7
Mounting typeISOFIX
Product colorGold
Car seat group0+ (0 - 13 kg; 0 - 15 months)
Adjustable backrestYes
Belt fastening type5-point
Weight and Dimensions IconWeight and Dimensions
Depth665 mm
Width440 mm
Weight5400 g
Height (max)570 mm
Height (min)403 mm

Related product manuals