CYBEX Cloud Q User Manual

ADJUSTING THE RECLINE POSITION
A new function of the Cloud Q is that it can be reclined to an almost
horizontal position outside of the car. With an extended leg-rest
and a fully reclined backrest, the child can lie comfortably and in an
ergonomically correct position.
The recline angle can be adjusted easily with one hand without
having to take the child out of the carrier, and the handle remains in
the carrying position for easier mobility.
1. While holding one hand on the handle, simply squeeze
the Recline Release Handle and push the seatback
down until it locks into the full recline position.
In the reclined position a red blocker closes off the lap belt
guide to indicate that it is not allowed to use the carrier in a
vehicle when the carrier is reclined.
2. To get back to Car Seat Mode simply squeeze
the Recline Relase Handle and lift backrest up
until it locks into the upright position.
Combined with the CYBEX Priam and M-strollers the Cloud Q
becomes a both striking and very practical travel system.
22
CAR SEAT MODE
RECLINED MODE
2
1
The CYBEX CLOUD Q must only be reclined outside of
the vehicle.
NEVER INSTALL this child restraint in a vehicle when
the carrier is in the reclined position.
USING THE INFANT CARRIER OUTSIDE OF THE VEHICLE
EN

CYBEX Cloud Q Specifications

General

Certification	ECE R-44/04, Supplement 7
Mounting type	ISOFIX
Product color	Gold
Car seat group	0+ (0 - 13 kg; 0 - 15 months)
Adjustable backrest	Yes
Belt fastening type	5-point

Weight and Dimensions

Depth	665 mm
Width	440 mm
Weight	5400 g
Height (max)	570 mm
Height (min)	403 mm