CYBEX Cloud Q User Manual

SPOT CLEANING
Spot clean Seat Covers, Shoulder Pads, Buckle Pad, and the
Infant Insert as needed with a clean cloth using mild detergent and
water.
WASHING INSTRUCTIONS
Seat cover parts can be washed as follows:
• Preferably wash by hand in lukewarm water
• Machine wash COLD, gentle cycle, mild detergent
• Line Dry
DO NOT (or cover will shrink)
• Do NOT machine wash warm or hot
• DO NOT TUMBLE DRY
• Do NOT iron
• Do NOT use bleach
HARNESS STRAPS
Sponge clean using warm water and mild soap. Air dry. Do not iron.
HARNESS BUCKLE
Sponge clean or thoroughly rinse Harness Buckle with warm water.
Test by fastening and unfastening until an audible CLICK is heard
after inserting each Buckle Tongue into the Buckle. If CLICKS are
not heard, repeat the cleaning procedure.
LATCH CONNECTORS
Sponge clean or thoroughly rinse LATCH Connectors with
warm water. Allow to dry thoroughly. Test by connecting and
disconnecting until an audible CLICK is heard after connecting
each connector to a lower LATCH anchor. If clicks are not heard,
repeat the cleaning procedure.
PLASTIC PARTS
Wipe clean with mild detergent and warm water.
46
NEVER remove Harness or Harness components from
Infant Carrier.
NEVER use bleach, household cleaners or solvents.
DO NOT lubricate.
CARE AND CLEANING
EN

CYBEX Cloud Q Specifications

General

Certification	ECE R-44/04, Supplement 7
Mounting type	ISOFIX
Product color	Gold
Car seat group	0+ (0 - 13 kg; 0 - 15 months)
Adjustable backrest	Yes
Belt fastening type	5-point

Weight and Dimensions

Depth	665 mm
Width	440 mm
Weight	5400 g
Height (max)	570 mm
Height (min)	403 mm