CYBEX Cloud Q User Manual

It's very important for your child's safety that this child
restraint be installed at the correct angle.
ADJUST RECLINE
Adjust the seat angle until the RED Level Line on the Infant
Carrier is level with the ground.
If you are having trouble achieving the proper recline angle:
1. Uninstall Infant Carrier.
2. Place a tightly rolled towel or pool noodle under
the Infant Carrier, where indicated. If on an aircraft,
a tightly rolled airline blanket may be placed
under the Infant Carrier to adjust the angle.
3. Continue installation.
43
LINE MUST BE LEVEL WITH GROUND
WHEN INSTALLED WITHOUT BASE
FRONT OF VEHICLE
LINE MUST BE LEVEL WITH GROUND
WHEN INSTALLED WITHOUT BASE
FRONT OF VEHICLE
DO NOT use this or any other child restraint with a
premature, low birth weight, or medically fragile infant,
until after you have consulted with your doctor. Some
infants may have difculty breathing or have other
medical problems when placed in a seated position.
If the child restraint is too upright, the child's head
may fall forward and cause breathing problems. If the
child restraint is TOO RECLINED crash protection will
be reduced.
Failure to properly recline the child restraint on the
vehicle seat increases the risk of Death or serious
injury.
ADJUSTING THE RECLINE ANGLE WITHOUT THE BASE

CYBEX Cloud Q Specifications

General

Certification	ECE R-44/04, Supplement 7
Mounting type	ISOFIX
Product color	Gold
Car seat group	0+ (0 - 13 kg; 0 - 15 months)
Adjustable backrest	Yes
Belt fastening type	5-point

Weight and Dimensions

Depth	665 mm
Width	440 mm
Weight	5400 g
Height (max)	570 mm
Height (min)	403 mm