Cygnus M5-C2P - Vibrate Alert Function

Cygnus 2+ Operating Manual
M5-CYG2P-M-01_Iss6.doc
46
Vibrate Alert Function
The gauge can vibrate to alert the user when a thickness
measurement has been made. This feature can be turned on or off
as required.
In Single Echo and Echo-Echo measurement modes the vibrate
alert will be triggered when a stable measurement is detected. See
Measurement Stability Indication in SE & EE Modes on page 26.
1.
Press the Menu key
2.
Press the Up Select key to get to
the Vibrate item
3.
Press the Menu key to change
the value
4.
Use the Up and Down Select
keys to change the setting from
On to Off