Cygnus MR500 View - Messages, Glossary, and Specifications; Messages and Glossary

53
CYGNUS
8 Messages / Glossary
If your MR500 View produces a message or abbreviation that you do not understand, use this
table for help.
Text Notes Section(s)
12 hour clock format 4.3.2
24 hour clock format 4.3.2
AM 4.3.2
Speed Alarm 1 4.6.5
Speed Alarm 2 4.6.5
Alarm Clock setting / Speed Alarm setting 4.3.5
April 4.3.3
August 4.3.3
Prompt in INFO Menu for setting of Auto Turnoff feature 4.4.4
Basic totals system setting 4.7
Display brightness setting 4.4.2
Calibration 4.6.2
Meter clock is unset 4.3.2
Code (e.g. Tariff Code) 4.5.4
Comms Options Menu Entry 4.4.7
‘Date’ from ‘End Date’. Indicates expiry date of tariff 4.5
December 4.3.3
Driver
‘Disable’ Part of the Disable Feature Info Menu entry 4.3.4
The meter will be disabled in the number of days shown 4.3.4
Meter is Disabled. Enter Disable PIN to enable it 4.3.4
Initialising the internal non-volatile memory 1.4
Tariff end date 4.3.4
Prompt to enter a PIN
Indicates an error condition
The tariff will expire in the number of days shown 4.3.4
‘Extras’. (Totals) 5
‘Fare’. (Totals) 5
February 4.3.3
Friday 4.3.3
Indicates a Pulse Count is ‘HELD’ or suspended. 4.6.3
An attempt has been made to set an invalid tariff or calibration
4.5
January 4.3.3