CYP EASYDCC System User Manual

2
Basic Starter System - Quick Start
Contents of the Basic Starter System:
- Command Station
- ZoneMaster Single Booster
- High current power supply DCPS120 and power cord
- Low current plug-in wall transformer for Command Station
- One 7-foot modular cable
- System Installation and Operation Manual
- ZoneMaster User Guide
In addition to the above items, you will need about 3 feet of test track, a bit of hookup wire and a
locomotive equipped with a DCC compatible decoder.
Initial Test Track Hookup
We strongly suggest that you first hookup the system to a separate section of test track. Once you
have used the system and checked it out thoroughly, you can begin permanent installation
knowing that everything is working properly.
The Basic Starter System content list and Basic Starter System Quick Start will not include any
extra items you may have purchased or upgraded as part of your original purchase. Regardless,
the basic hookup and use remains the same. Refer to the instructions that come with the extra
items.
Command Station Rear View
Power Supply
DCPS120
Booster
Modular
Cable
Temporary Test Track
Temporary
Programming Track
12VAC
Transformer

CYP EASYDCC System Specifications

General

Brand	CYP
Model	EASYDCC System
Category	Control Unit
Language	English