MB95710M Series
MB95770M Series
Document Number: 002-09307 Rev. *D Page 50 of 172
• R/W access symbols
• Initial value symbols
Note: Do not write to an address that is “(Disabled)”. If a “(Disabled)” address is read, an indeterminate value is returned.
0x0FE7 CRTDA
Main CR clock temperature dependent adjustment
register
R/W 0b000XXXXX
0x0FE8 SYSC System configuration register R/W 0b00111111
0x0FE9 CMCR Clock monitoring control register R/W 0b00000000
0x0FEA CMDR Clock monitoring data register R 0b00000000
0x0FEB WDTH Watchdog timer selection ID register (upper) R 0bXXXXXXXX
0x0FEC WDTL Watchdog timer selection ID register (lower) R 0bXXXXXXXX
0x0FED,
0x0FEE
— (Disabled) — —
0x0FEF WICR Interrupt pin selection circuit control register R/W 0b01000000
0x0FF0
to
0x0FFF
— (Disabled) — —
R/W : Readable/Writable
R : Read only
0 : The initial value of this bit is “0”.
1 : The initial value of this bit is “1”.
X : The initial value of this bit is undefined.
Address
Register
abbreviation
Register name R/W Initial value
To Next Page
Loading...
