4.2 Captive Ending Installation
The D-BOX captive ending is a 2 components assembly:
Spacer Retainer: The spacer-retainer allows specific movements of the ball joint on both X and Y axes, thus
eliminating any constraints during the movement of the platform. There are 2 models of
spacer retainer. All spacer retainers can be fitted on any model of ball joint.
1 axis: Allowing movement only on 1 axis (X or Y)
2 axes: Allowing movement on 2 axes (X and Y)
Here are some spacer retainer configurations:
CAUTION: Respect the orientation of the spacer retainer to avoid any damage to the haptic system.
To help with positioning, the spacer retainer is marked OUTWARD on its top surface:
To Next Page
Loading...