DIR-842V2 AC1200 Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
Parameter Description
Scanning period
Specify a period of time (in seconds) after which the router
rescans channels.
When you have configured the parameters, click the APPLY button.
To edit the settings of the basic wireless network, in the Wi-Fi Network section, change the needed
parameters and click the APPLY button.
Also you can create an additional wireless network. To do this, click the ADD WI-FI NETWORK
button. On the opened page, specify the relevant parameters.
Figure 93. Creating a wireless network.
Parameter Description
Wi-Fi Network
Network name (SSID)
A name for the wireless network.
To Next Page
Loading...
