D-Link AC1200 - Back Panel

DIR-842V2
User Manual
AC1200 Wi-Fi Gigabit Router
Overview
Page 16
Back Panel
Figure 2. Back panel view.
Name Description
RESET
A button to restore the factory defaults.
To restore the factory defaults, push the button (with the device turned
on), hold it for 10 seconds, and then release the button.
WPS
A button to connect mesh network devices or set up wireless
connection (the WPS function).
To connect mesh network devices or use the WPS function: with the
device turned on, push and release the button.
To disable the router's wireless network: with the device turned on,
push the button, hold it for 10 seconds, and release.
LAN 1-4
4 Ethernet ports to connect computers or network devices.