DIR-842V2 AC1200 Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
MAC Filter
On the Functions / Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices
which will be allowed to access the WLAN, or define MAC addresses of devices which will not be
allowed to access the WLAN.
It is recommended to configure the Wi-Fi MAC filter through a wired connection to
DIR-842V2
Figure 142. The page for configuring the MAC filter for the wireless network.
By default, the Wi-Fi MAC filter is not configured.
To configure the MAC filter, first you need to create rules (specify MAC addresses of devices for
which the specified filtering modes will be applied). To do this, click the ADD button ( ).
Figure 143. The window for adding a rule for the MAC filter.
To Next Page
Loading...
