DIR-842V2 AC1200 Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
In order to let wired PCs connected to your device access the network of a wireless router, on the
Device mode page, from the Connection method list, select the Autonomous value. Then
from the Work mode list select the Client value. In this mode you can change the LAN IP
address, connect your device to another access point and set your own password for access to the
web-based interface of the device.
Figure 41. Selecting an operation mode. The Client mode.
When the operation mode is selected, click the NEXT button.
To Next Page
Loading...
