DIR-842V2 AC1200 Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
5. If you want to create an additional wireless network isolated from your LAN in the 2.4GHz
band, select the Enable guest network checkbox (available for the Router and WISP
Repeater modes only).
Figure 57. The page for configuring the wireless network.
6. In the Network name field, specify your own name for the guest wireless network or leave
the value suggested by the router.
7. If you want to create a password for access to the guest wireless network, deselect the Open
network checkbox and fill in the Password field.
8. If you want to limit the bandwidth of the guest wireless network, select the Enable
shaping checkbox and fill in the Shaping field.
9. Click the NEXT button to continue or click the BACK button to specify other settings.
10. On the Wireless Network 5 GHz page, specify needed settings for the wireless network
in the 5GHz band and click the NEXT button.
To Next Page
Loading...
