DIR-842V2 AC1200 Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
Figure 76. The page for creating a new PPTP connection. The IPv4 section.
Parameter
Description
IPv4
Obtain DNS server
addresses
automatically
Move the switch to the right to configure automatic assignment of
DNS server addresses. Upon that the Primary DNS and
Secondary DNS fields are not available for editing.
Primary DNS /
Secondary DNS
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Figure 77. The page for creating a new L2TP over IPsec connection. The IPsec section.
Setting for both parties which establish the tunnel should be the same.
Parameter Description
IPsec (for the L2TP over IPsec type)
Pre-shared key
A key for mutual authentication of the parties. Click the Show icon
( ) to display the entered key.
To Next Page
Loading...
