114D-Link DIR-890L User Manual
Section 4 - Conguration - Access Point Mode
Upgrade
This page allows you to upgrade the DIR-890L’s firmware or language pack, either
automatically or manually. To manually upgrade the rmware or language pack, you must
rst download the relevant le from http://support.dlink.com.
In the Management menu on the bar on the top of the page, click Upgrade.
Firmware
Firmware
Information:
The current rmware’s version and date is displayed.
Check for New
Firmware:
Click this button to prompt the router to automatically check for a new
rmware version. If a newer version is found, you will be prompted to
install it.
Upgrade Manually
Upgrade
Firmware:
If you wish to upgrade the firmware manually, first download the
rmware le you wish to upgrade to. Next, click the Upgrade Firmware
button and browse to the le to install the new rmware. You can also
browse to a language pack le to install a new language pack.
DIR-890L HW:A1 FW:1.10
Upgrade
Your router can automatically detect rmware updates, but requires your authorization to install them. It is
also possible to check for new rmware manually, upgrade rmware from a local le.
Management >> Upgrade
Firmware Information
Upgrade Manually
Current Firmware Version: 1.10, Tue 24 May 2016
Current Firmware Date: 2016-05-24 17:49:00
Check for New Firmware
Upgrade Firmware:
Select File
COPYRIGHT © 2016 D-Link
Firmware Information
New Firmware Version: Number here
New Firmware Date: Date here
Current Firmware Version: 1.10, Tue 24 May 2016
Current Firmware Date: 2016-05-24 17:49:00
Download New Firmware
SettingsHome Management
To Next Page
Loading...
