D-Link AC3200 Ultra - Ipv6 Host

85D-Link DIR-890L User Manual
Section 4 - Conguration - Router Mode
IPv6 Host
The IPv6 host settings are found at the bottom of the Dynamic DNS page.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to
edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click
the Add Record button. Click Save when you are done. If you edit or create a rule, the
following options will appear:
Create New Record
Host Name: Enter the host name that you registered with your dynamic DNS
service provider.
IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select
the server device in the drop-down menu.
Click Save when you are done.
DIR-890L HW:A1 FW:1.10
Features >> Dynamic DNS
Dynamic DNS
Dynamic Domain Name Service allows your router to associate an easy-to-remember domain name such as
[YourDomainName].com with the regularly changing IP address assigned by your Internet Service provider.
This feature is helpful when running a virtual server.
Settings FeaturesHome Management
Save
Enable Dynamic DNS:
Enabled
Status: Disconnected
Server Address:
dyndns.com
dyndns.com
⌵
Host Name:
User Name:
Password:
Time Out:
24
hours
Status Host Name IPv6 Address Edit Delete
✓
Test 2001::
Remaining: 9
Add Record
COPYRIGHT © 2016 D-Link
Host Name:
IPv6 Address:
<< Computer Name
⌵
Create New Record
Apply