DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
Configuring Device (Router Mode)
Figure 83. Configuring PPTP + Dynamic IP WAN connection.
Leave the Connect automatically checkbox selected to allow automatic start of the connection
upon the load of the access point.
In the Username field, enter your login, and in the Password and Password confirmation
fields – the password provided by your ISP.
If authorization is not required, select the Without authorization checkbox.
In the VPN server address field, enter the IP or URL address of the PPTP or L2TP
authentication server.
Page 90 of 175
To Next Page
Loading...
