D-Link DAP-1330 User Manual

30D-Link DAP-1330 User Manual
Section 3 - Conguration
Home
Conguration
The home screen gives a summary of the current status of devices connected to the DAP-1330. A green check between the device
and the uplink router indicates that there is an active connection. A red cross indicates that there is no connection present, or there
is a connection error. If there’s no active uplink connection, click on the Uplink Router icon to start the setup wizard.
This icon shows the status of the Internet connection to the uplink router. It is grey if the DAP-1330 is not connected to an uplink
router. Once connected, click on it to see its connection details.
Click on this icon to see details of the uplink network the DAP-1330 is connected to or connect to another uplink router..
Click on the Wi-Fi Clients icon to see client details.
Uplink Router:
DAP-1330:
Connected
Clients:

D-Link DAP-1330 Specifications

General

Product color	White
LED indicators	Yes
Maximum data transfer rate	100 Mbit/s
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3u
Interface	Wi-Fi/Ethernet
Ethernet LAN (RJ-45) ports	1
Security algorithms	WPA, WPA2, WPS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating altitude	5 - 95 m
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Certification	FCC, IC, CE, C-Tick, CB, UL

Weight and Dimensions

Weight	86.9 g
Dimensions (WxDxH)	77 x 55.5 x 34 mm