EasyManuals Logo

D-Link DAP-2695 User Manual

D-Link DAP-2695
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25D-Link DAP-2695 User Manual
Section 3 - Conguration
Wireless Resource Control
The Wireless Resource Control window is used to congure the wireless connection settings so that the device can detect the better wireless
connection in your environment.
Wireless band:
Band Steering:
Band Steering Age:
Band Steering Di:
Band Steering
Refuse Num:
Connection Limit:
Select 2.4GHz or 5GHz.
Use the drop-down menu to Enable the Band
Steering function. When the wireless clients
support both 2.4GHz and 5GHz and the 2.4GHz
signal is not strong enough, the device will use
5GHz as higher priority.
Enter the time in seconds to specify the interval
of updating information.
The Band Steering dierence value is equal to
the number of 5GHz wireless client connections
minus the number of 2.4GHz wireless client con-
nections. If the number of 5GHz wireless client
connections minus the number of 2.4GHz wire-
less client connections exceed this value, the
extra 5GHz wireless client connections will be
forced to connect to the 2.4GHz band and not
the 5GHz band.
Enter the maximum 5GHz connection attempts allowed before the 5GHz preferred function will be disabled for the wire-
less station connection.
Select Enable or Disable. This is an option for load balancing. This determines whether to limit the number of users
accessing this device. The exact number is entered in the User Limit eld below. This feature allows the user to share the
wireless network trac and the client using multiple APs. If this function is enabled and when the number of users ex-
ceeds this value, or the network utilization of this AP exceeds the percentage that has been specied, the DAP-2695 will
not allow clients to associate with the AP.

Table of Contents

Other manuals for D-Link DAP-2695

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DAP-2695 and is the answer not in the manual?

D-Link DAP-2695 Specifications

Operating Environment IconOperating Environment
operating temperature0˚C to 40˚C
storage temperature-20˚C to 65˚C
operating humidity10%~90% (non-condensing)
storage humidity5%~95% (non-condensing)
Power IconPower
operating voltage48V DC +/- 10% for PoE
voltage and current for PoE48V/0.5A
Wireless Specifications IconWireless Specifications
wireless frequency range2.4 to 2.4835 GHz and 5.15 to 5.85 GHz
antenna type at 2.4GHz3x Detachable 4 dBi Omni antennas
antenna type at 5GHz3x Detachable 6 dBi Omni antennas
Weight and Dimensions IconWeight and Dimensions
length198.8 mm
width190 mm
height36.5 mm

Related product manuals