D-Link DCS-2103 User Manual

39D-Link DCS-2103 User Manual
Section 3: Conguration
Event Setup
In a typical application, when motion is detected, the DCS-2103 sends images to a FTP server or via e-mail as notications. As shown in the
illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is
triggered, a specied action will be performed. You can congure the Network Camera to send snapshots or videos to your e-mail address or FTP
site.
ex.
Motion detection,
Periodically, Digital input,
System reboot
Event Condition
ex.
Snapshot, Video Clips
ex.
Email, FTP
Media
(what to send)
Server
(where to send)
Action
To start plotting an event, it is suggested to congure server and media columns rst so that the Network Camera will know what action shall be
performed when a trigger is activated.

D-Link DCS-2103 Specifications

General

Brand	D-Link
Model	DCS-2103
Category	Security Camera
Language	English