35D-Link DCS-2103 User Manual
Section 3: Conguration
Motion Detection
Motion detection enables the camera to monitor the video feed for movement. Here, you can adjust the sensitivity and percentage settings, which
work together to determine whether motion is detected by the camera or not. After making any changes, click the Save Settings button to save
your changes.
Enable Video Motion:
Sensitivity:
Percentage:
Select this box to enable the motion detection feature
of your camera.
Species how sensitive motion detection will be from
0% to 100%. A low sensitivity setting means that there
must be large changes between two images in order to
detect motion, and a high sensitivity setting means that
even small changes will cause motion to be detected.
Low sensitivities may be useful when monitoring an area
that has ickering lights or a window to the outside in
view. High sensitivities may be useful when monitoring
an area that rarely changes, such as a storeroom or
warehouse.
Species how much of the area being monitored for
motion must change for motion to be detected. A low
percentage means that only part of the area being
monitored needs to change to detect motion, and a
high percentage means that most of the area needs to
change to detect motion.
Low percentages can be useful when monitoring a large
area such as an entire room, and high percentages can
be useful when you are only monitoring a specic part
of the camera’s view, such as a doorway.
To Next Page
Loading...
Need help?
General
