8D-Link DCS-2103 User Manual
Section 1: Product Overview
Rear
1 PoE Ethernet Port
Connects to your Ethernet network, can receive power from a PoE switch or PoE
injector
2 Reset Button
Press and hold this button for 10 seconds to reset the camera
3 Power Connector
Connects to the included DC 5 V power adapter (not needed if using a PoE
connection)
4 DI/DO Connector
I/O connectors for external devices
5 Adjustment Ring Tighten or loosen the adjustment ring to adjust the camera's position
1
2
3
4
5
To Next Page
Loading...
