D-Link DCS-2103 User Manual

50D-Link DCS-2103 User Manual
Section 3: Conguration
ICR and IR
Here you can congure the ICR and IR settings. The IR(Infrared) Cut-Removable(ICR) lter can be disengaged for increased sensitivity in low light
environments.
Automatic:
Day Mode:
Night Mode:
Schedule Mode:
IR Light Control:
O:
On:
Sync with ICR:
Schedule:
The Day/Night mode is set automatically. You can use the
Sensitivity dropdown box to set when the camera will
switch to Night mode. The text box to the right shows
what lighting conditions are currently being detected
by the camera for reference. You can refresh this status
by clicking the Refresh button.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a schedule. The camera
will enter Day mode at the starting time and return to
Night mode at the ending time.
The camera can enable or disable the IR (infrared) light
according to your preferences. This setting provides
additional controls depending on your specic application.
The IR light will always be o.
The IR light will always be on.
The IR light will turn on when the ICR sensor is on.
The IR light will turn on or o according to the schedule
that you specify below.

D-Link DCS-2103 Specifications

General

Brand	D-Link
Model	DCS-2103
Category	Security Camera
Language	English