7
Installing the SmartConsole Utility
Through the Web Browser you can configure the Switch such as VLAN,
Trunking, QoS… etc.
The following instruction guides you to install the SmartConsole Utility.
1. Insert the Utility CD in the CD-Rom Drive.
2. From the Start menu on the Windows desktop, choose Run.
3. In the Run dialog box, type D:\ SmartConsole Utility \setup.exe (D:\
depends where your CD-Rom drive is located) and click OK.
4. Follow the on-screen instructions to install the utility.
5. Upon completion, go to Program Files -> SmartConsole Utility
and execute the SmartConsole Utility. (Figure 1.)
Figure 1
To Next Page
Loading...
Need help?
General