9
9
UNPACKING AND INSTALLATION
This chapter provides unpacking and installation information for the
Smart Switch.
Unpacking
Carefully unpack the contents of the Smart Switch from the box and
locate the following items:
One DGS-1248T Gigabit Smart Switch
One AC power cord, suitable for the local electrical power voltage
requirements
Four rubber feet to be used for shock cushioning
Screws and two mounting brackets
CD-Rom with the SmartConsole Utility application, which includes
the full User’s Manual
Quick Installation Guide
If any item is found missing or damaged, please contact the reseller
for replacement.
Installation
The site chosen for installation greatly affects the Web-Smart
Switch’s performance. When installing, consider the following points:
Install the Switch in a fairly cool and dry place. See Technical
Specifications for the acceptable temperature and humidity
operating ranges.
To Next Page
Loading...
Need help?
General