1
1
3
3
IDENTIFYING EXTERNAL COMPONENTS
This chapter describes the front panel, rear panel, and LED indicators
of the Switch.
Front Panel
The figure below shows the front panel of the Switch.
Figure 4 – Front panel of the 48-port Web-Smart Switch
Reset button:
The Reset button resets all configuration settings back to the factory
default.
Note: Be sure to save or record any custom settings configured on
the Switch before pressing the reset button. Resetting the Switch
back to factory default settings will erase all custom configurations.
LED Indicator:
Comprehensive LED indicators display the status of the switch and
the network (see the Understanding LED Indicators section).
1000 BASE-T Twisted Pair Ports (Port 1~48)
The DGS-1248T is equipped with 48 gigabit twisted pair ports that
are auto negotiable 10/100/1000Mbps and also support auto
To Next Page
Loading...
Need help?
General